tripleninegroup

Archie Rose Distilling Co.

justin@tripleninegroup.com.au (Justin Brooks) — Fri, 14 Sep 2018 04:00:58 GMT

New distillery to be built in Botany

Sydney-based Archie Rose Distilling Co. has commenced construction of a new distillery and bond store in Botany NSW, scheduled for completion in mid-2019. Triple Nine Group are proud to announce that we have been engaged by Archie Rose Distillery for the mechanical install of the new distillery.

The new site, located just south of the brand’s existing Roseberry facility, will feature energy efficient brewing and distilling technology, some of which is the first of its kind in Australia. The distillery will be custom built to accommodate Archie Rose’s unique production processes, including its six-malt single malt mash bill, extensive use of specialty roasted malts, malted rye and individually distilled gin botanicals.

Archie Rose founder Will Edwards added, "this new site is an incredibly exciting step for us, not only will it allow us to increase our whisky production on custom designed equipment able to handle our unique mash bill and production processes, but it allows us to further consider sustainability across all aspects of our plant, equipment and processes, while continuing to support and champion boutique Australian farmers, maltsters and botanical producers"

Through word of mouth referrals Triple Nine Group were contacted by specialist Scotland based distillery designers, Allen Associates, and have worked closely with Allen Associates to provide advice on local design techniques, standards and supplier options for the project.

Triple Nine Group look forward to the projects progression and will keep you up to date over the coming months on this world class distillery for Australia.

www.archierose.com.au

31/7/18 - New WFI & Pure steam system for Parnell Laboratories

justin@tripleninegroup.com.au (Justin Brooks) — Tue, 31 Jul 2018 03:01:04 GMT

TRIPLENINE have recently been engaged by Parnell Laboratories to replace their existing WFI & pure steam production systems. Together with our system partners Elettracqua we were able to provide a solution that fitted the limited space and also increase the production capacity by 50%. Included in the order is a new fully heat sanitisable dual pass RO + EDI pre-treatment system feeding the WFI still and PSG.
Also included in the scope is the integration of the existing distribution system controls which will allow the complete system to be controlled from one point. Another unique offering from Triplenine Group which highlights our innovation and flexibility.
www. elettracqua.com
Stay tuned for further updates

ORBITAL WELDING

Wed, 04 Apr 2018 05:44:49 GMT

Why Orbital Welding?

Orbital Welding was first introduced in the late 1960’s as a way to reduce the weight of hydraulic and fuel systems on commercial aircraft.

In the Pharmaceutical Industry: In the late 1970’s orbital welding began to be used for Pharmaceutical water systems as a way to eliminate any Contamination or areas where water may be retained for possible bacteria Growth…as can happen with manual welding.

In the Semiconductor Industry: In the early 1980’s with the explosion in semiconductors orbital welding was introduced as a method to improve Yields through improved gas purity and leak integrity.

Why Orbital Welding?

Orbital Welding was first introduced in the late 1960’s as a way to reduce the weight of hydraulic and fuel systems on commercial aircraft.

In the Semiconductor Industry: In the early 1980’s with the explosion in semiconductors orbital welding was introduced as a method to improve Yields through improved gas purity and leak integrity.

Critical Variables When Performing Orbital Welding

Tube Welding is extremely repeatable, accurate and precise when all of the associated variables are identified, monitored and controlled.

Any one of these variables may affect the weld quality. Tube preparation in terms of being square and fit up is extremely important. The surface must be free of burrs while not being excessively de-burred.

Uses for Semiconductor Gas Delivery Systems

Orbital Welding is used in many aspects of the semiconductor gas delivery systems including: Welding Fittings on Regulators and Gauges, welding Pressure Transducers, welding Fittings on Valves, Gas Delivery Lines, Gas Panels, Internal Components on Regulators and other Devices.

Key Advantages Of Orbital Welding Systems

Extremely repeatable welds, Smooth and even tube bore and smaller
heat affected zone (HAZ)
Elimination of defects including porosity and cracking

Other orbital welding variables include:

Material chemistry and heat, Weld procedure parameters, Tungsten geometry and eccentricity when it orbits, Tube cleanliness, Purge gas quality and quantity, Ambient conditions and Input power

ORBITAL TUBE AND PIPE WELDING SPECIALISTS

Wed, 04 Apr 2018 05:38:46 GMT

Sed eget cursus metus. Proin finibus volutpat consectetur. Proin vitae arcu vitae dolor porttitor vestibulum sed non dolor. Pellentesque lacinia erat diam, in dapibus mi venenatis non. Praesent ut massa est. Praesent eu odio auctor, aliquet risus non, auctor nisl. Vivamus dictum tincidunt consectetur. Aliquam commodo dignissim lorem vitae viverra. Sed quis maximus dolor. In hac habitasse platea dictumst. Cras auctor magna quis lorem sodales convallis. Quisque sodales congue quam, sed tincidunt dolor mollis id. Nunc sed lacus semper mauris lacinia volutpat. Quisque consectetur et nunc in vulputate. Nullam euismod lectus nec metus sodales scelerisque. Ut mi est, commodo non purus eu, ultricies sagittis sapien

THE ENGINEERING OF TODAY

Wed, 04 Apr 2018 05:13:46 GMT

The meaning of the word engineering has changed since it was first coined in the 14th century but it plays an increasingly significant role in modern technology and process systems. The term ‘engineering’ is derived from the word ‘engineer’, which dates back to 1390, when an engineer was a constructor of military engines. But in today’s world, any engineer worth his salt knows how to multi-task.

Put simply, engineering is the application of scientific and mathematical knowledge to solve problems in the real world, and the four major disciplines of engineering are mechanical, civil , electrical and chemical . Whilst traditionally an engineer would specialise in just one discipline, today’s breed have to be polymaths.
In modern times, a process engineer is often expected to have knowledge of mechanical, electrical and electronic systems, as well as software design, and engineering for safety. As process systems come to rely more and more on electronics and connectivity, the level of multidisciplinary knowledge a process engineer requires increases.

THE HUMBLE BEGINNINGS

Wed, 04 Apr 2018 05:12:00 GMT

SAFETY IN STORAGE

hello@yourdigitalagency.com.au (Leah Gibbs) — Thu, 07 Jan 2016 00:00:00 GMT